尊龙凯时

EPDM – 中国C919飞机橡胶接头供应商-上海尊龙凯时减震器集团有限公司官方网站 https://www.nccdfs.com 上海尊龙凯时集团 Fri, 29 Apr 2022 10:47:40 +0000 zh-Hans hourly 1 https://wordpress.org/?v=6.8 【EPDM】球墨法兰三元乙丙橡胶接头“外观专利” https://www.nccdfs.com/1873.html https://www.nccdfs.com/1873.html#respond Wed, 05 Dec 2018 00:01:16 +0000 【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
"Appearance Patent" for EPDM Joints with Ductile Graphite Flanges

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”信息,尊龙凯时集团为众多客户提供新式球墨法兰三元乙丙橡胶接头,法兰采用新型设计 ,并申请了外观设计专利,施工更轻便,外观更新颖 。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] EPDM nodular flange ternary EPDM rubber joint "appearance patent" information, Songjiang Group provides new type nodular flange ternary EPDM rubber joint for many customers, the flange uses new design, and applied for the appearance design patent, construction is lighter, and more convenient. The outlook is more original.

【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
说明 :
我公司耐高温橡胶接头阀体上有材质标识区 ,箭头指向EPDM ,如果箭头没有指向EPDM ,那么该产品不是三元乙丙橡胶接头,请勿在耐酸碱 、耐高温环境使用,避免带来安全隐患,可以联系尊龙凯时。
Explain:
There is a material identification area on the valve body of our company's high-temperature resistant rubber joint, and the arrow points to EPDM. If the arrow does not point to EPDM, the product is not EPDM joint. Please do not use it in acid-base and high-temperature resistant environment to avoid potential safety hazards. You can contact us.
·
名称:EPDM橡胶接头
型号 :KXT-QT450-EPDM
口径:DN80(了解该产品参数信息请点击 :【样册P33】KXT型可曲挠橡胶接头
压力 :1.6Mpa
长度:135mm
轴向压缩:12mm
轴向拉伸:6mm
横向位移:10mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:球墨QT450(另有碳钢、不锈钢可选择)
法兰标准 :GB/T 9119-2000 (除此法兰标准之外 ,我厂还可以配套更多法兰标准 ,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、高温120度以下;(注明:强酸碱 、稀硫酸不能用,要选择内衬聚四氟乙烯橡胶接头才可以使用。
使用优点:减震 、降噪 、保护液压设备的长期使用,降低维修成本 。
质保期限:12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
资质证书 :合格证 、质保书 、检验报告 、国家型式试验报告、第三方性能检测报告 、含量成分检测报告 、德国莱茵TUV证书。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN80
Pressure: 1.6Mpa
Length: 135mm
Axial compression: 12mm
Axial tension: 6mm
Lateral displacement: 10mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.
相关链接:EPDM橡胶接头含量检测报告
Related links
以下是尊龙凯时集团介绍 :
The following is the introduction of Songjiang group
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”
【EPDM】球墨法兰三元乙丙橡胶接头“外观专利”

相关链接:橡胶接头案例

 

]]>
https://www.nccdfs.com/1873.html/feed 0
【EPDM】DN40三元乙丙橡胶接头“耐腐蚀” https://www.nccdfs.com/1824.html https://www.nccdfs.com/1824.html#respond Tue, 06 Nov 2018 03:34:00 +0000 【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”
DN40 three ethylene propylene rubber joint "corrosion resistance"

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”信息 ,尊龙凯时集团为众多化工企业提供耐腐蚀的橡胶接头,安装在管道的接口处,可以吸收管道的震动和位移,帮助管道系统的长期稳定运行。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN40 EPDM Ternary Ethylene-propylene Rubber Joint "corrosion-resistant" information. Songjiang Group provides corrosion-resistant rubber joints for many chemical enterprises, which are installed at the joint of pipelines, can absorb the vibration and displacement of pipelines, and help the long-term stable transportation of pipeline systems. That's ok.

一、三元乙丙耐腐蚀橡胶接头实物拍照  :

【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”
二、三元乙丙耐腐蚀橡胶接头介绍:
名称 :EPDM橡胶接头
型号:KXT-EPDM
口径:DN40
压力  :1.6Mpa
长度 :95mm
轴向压缩:8mm
轴向拉伸:5mm
横向位移 :8mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质 :碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外 ,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击 :橡胶接头法兰标准
适用介质 :弱酸碱、强碱 、石灰浆液、脱硫 、化工厂污水 、高温120度以下 ;(注明 :强酸碱、稀硫酸不能用 ,要选择四氟橡胶接头才可以使用。
使用优点:减震 、降噪 、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击 :【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证 、质保书 、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN40
Pressure: 1.6Mpa
Length: 95mm
Axial compression: 8mm
Axial tension: 5mm
Lateral displacement: 8mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三 、三元乙丙耐腐蚀橡胶接头发货现场:

【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”

四、三元乙丙耐腐蚀橡胶接头工厂介绍 :

【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”
【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”
【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”
【EPDM】DN40三元乙丙橡胶接头“耐腐蚀”

相关案例:化工厂橡胶接头案例

]]>
https://www.nccdfs.com/1824.html/feed 0
【EPDM】DN50垃圾渗滤液橡胶接头 https://www.nccdfs.com/1823.html https://www.nccdfs.com/1823.html#respond Tue, 06 Nov 2018 03:22:50 +0000 【EPDM】DN50垃圾渗滤液橡胶接头
[EPDM] landfill leachate joint DN50

上海尊龙凯时减震器集团有限公司官方网站为您介绍 :【EPDM】DN50垃圾渗滤液橡胶接头信息 ,尊龙凯时集团为众多垃圾处理厂渗滤液管道提供耐酸碱橡胶接头,用于水处理系统中,起到了减震和降噪的作用,还能渗滤液的腐蚀。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. introduces to you: [EPDM] DN50 landfill leachate rubber joint information. Songjiang group provides acid-base resistant rubber joints for leachate pipelines of many waste treatment plants, which are used in water treatment systems to reduce vibration and noise, as well as the corrosion of leachate.

一、DN50垃圾渗滤液橡胶接头实物拍照 :

【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头
二、垃圾渗滤液橡胶接头介绍:
名称:EPDM橡胶接头
型号:KXT-EPDM
口径:DN50
压力 :1.6Mpa
长度 :105mm
轴向压缩:8mm
轴向拉伸:5mm
横向位移:8mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准 :GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质 :弱酸碱、强碱 、石灰浆液、脱硫 、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用。
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本 。
质保期限 :12个月
生产厂家:上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证、质保书 、检验报告 、德国莱茵TUV认证 、国家型式试验报告、第三方性能检测报告、含量成分检测报告 。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN50
Pressure: 1.6Mpa
Length: 105mm
Axial compression: 8mm
Axial tension: 5mm
Lateral displacement: 8mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、垃圾渗滤液橡胶接头发货现场 :

【EPDM】DN50垃圾渗滤液橡胶接头

四 、垃圾渗滤液橡胶接头工厂介绍:

【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头
【EPDM】DN50垃圾渗滤液橡胶接头

相关案例 :水处理案例

]]>
https://www.nccdfs.com/1823.html/feed 0
【EPDM】DN65化工管道橡胶补偿器 https://www.nccdfs.com/1820.html https://www.nccdfs.com/1820.html#respond Mon, 05 Nov 2018 11:20:39 +0000 【EPDM】DN65化工管道橡胶补偿器
DN65 DN65 rubber compensator for chemical pipeline

上海尊龙凯时减震器集团有限公司官方网站为您介绍 :【EPDM】DN65化工管道橡胶补偿器信息,尊龙凯时集团为化工厂管道生产一款耐酸碱的橡胶补偿器 ,用于管道的连接处,在管道热胀冷缩的时候伸缩,保护管道系统 。
The official website of Shanghai Songjiang shock absorber Group Co., Ltd. introduces to you: [EPDM] DN65 chemical pipeline rubber compensator information. Songjiang group produces an acid-base resistant rubber compensator for chemical plant pipelines, which is used at the connection of pipelines to expand and contract when the pipeline expands and contracts hot and contracts cold, so as to protect the pipeline system.

一 、化工管道橡胶补偿器实物拍照:

【EPDM】DN65化工管道橡胶补偿器
二 、化工管道橡胶补偿器介绍:
名称:EPDM橡胶补偿器
型号 :KXT-EPDM
口径:DN65
压力:1.6Mpa
长度 :115mm
轴向压缩:12mm
轴向拉伸:6mm
横向位移:10mm
偏向角度:15°
橡胶材质 :三元乙丙橡胶(三井4045)
法兰材质 :碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外 ,我厂还可以配套更多法兰标准 ,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:弱酸碱、强碱 、石灰浆液、脱硫 、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用。
使用优点:减震、降噪、保护液压设备的长期使用  ,降低维修成本。
质保期限 :12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击 :【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证、质保书 、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告 。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN65
Pressure: 1.6Mpa
Length: 115mm
Axial compression: 12mm
Axial tension: 6mm
Lateral displacement: 10mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、化工管道橡胶补偿器发货现场:

【EPDM】DN65化工管道橡胶补偿器

四、化工管道橡胶补偿器工厂介绍 :

【EPDM】DN65化工管道橡胶补偿器
【EPDM】DN65化工管道橡胶补偿器
【EPDM】DN65化工管道橡胶补偿器
【EPDM】DN65化工管道橡胶补偿器

相关案例  :火电厂案例

]]>
https://www.nccdfs.com/1820.html/feed 0
【EPDM】DN80热力管道橡胶膨胀节“三井4045” https://www.nccdfs.com/1819.html https://www.nccdfs.com/1819.html#respond Mon, 05 Nov 2018 10:43:23 +0000 【EPDM】DN80热力管道橡胶膨胀节“三井4045”
DN80 three yuan ethylene propylene rubber joint "Mitsui 4045"

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN80热力管道橡胶膨胀节“三井4045”信息,尊龙凯时集团为众多国外客户提供三元乙丙橡胶膨胀节 ,主要采用三井4045三元乙丙橡胶生产,具有良好的耐高温,耐酸碱效果。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN80 EPDM Ternary Ethylene-propylene Rubber Joint "Sanjing 4045" information, Songjiang Group provides EPDM Joint for many foreign customers, mainly using Sanjing 4045 Ternary Ethylene-propylene Rubber production, with good heat resistance, acid and alkali resistance.

一、DN80热力管道橡胶膨胀节实物拍照:

【EPDM】DN80热力管道橡胶膨胀节“三井4045”

二、热力管道橡胶膨胀节介绍:

名称 :EPDM橡胶接头
型号:KXT-EPDM
口径 :DN80
压力:1.6Mpa
长度 :135mm
轴向压缩 :12mm
轴向拉伸:6mm
横向位移:10mm
偏向角度:15°
橡胶材质 :三元乙丙橡胶(三井4045)
法兰材质 :碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外 ,我厂还可以配套更多法兰标准 ,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质 :热水、高温120度以下 、弱酸碱、强碱、石灰浆液、脱硫、化工厂污水;(注明 :强酸碱、稀硫酸不能用 ,要选择四氟橡胶接头才可以使用。
使用优点:减震、降噪、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击 :【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证、质保书、检验报告、德国莱茵TUV认证、国家型式试验报告 、第三方性能检测报告、含量成分检测报告。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN80
Pressure: 1.6Mpa
Length: 135mm
Axial compression: 12mm
Axial tension: 6mm
Lateral displacement: 10mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三 、热力管道橡胶膨胀节发货现场 :

【EPDM】DN80热力管道橡胶膨胀节“三井4045”

四 、热力管道橡胶膨胀节工厂介绍:

【EPDM】DN80热力管道橡胶膨胀节“三井4045”
【EPDM】DN80热力管道橡胶膨胀节“三井4045”
【EPDM】DN80热力管道橡胶膨胀节“三井4045”
【EPDM】DN80热力管道橡胶膨胀节“三井4045”

相关案例 :热力锅炉橡胶接头案例

]]>
https://www.nccdfs.com/1819.html/feed 0
【EPDM】DN100三元乙丙橡胶接头“换热机组” https://www.nccdfs.com/1818.html https://www.nccdfs.com/1818.html#respond Mon, 05 Nov 2018 01:23:21 +0000 【EPDM】DN100三元乙丙橡胶接头“换热机组”
DN100 three yuan ethylene propylene rubber joint "heat exchange unit"

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN100三元乙丙橡胶接头“换热机组”信息,尊龙凯时集团为众多客户换热机组厂家提供耐高温橡胶接头,主要采用三井4045三元乙丙橡胶生产,其中含量达到50%左右,我厂有三方含量检测报告,假一赔十 。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN100 EPDM Ternary Ethylene-propylene Rubber Joint "Heat Exchanger Unit" information, Songjiang Group provides high temperature resistant rubber joint for many customers heat exchanger manufacturers, mainly using Sanjing 4045 Ternary Ethylene-propylene Rubber production, which content reaches about 50%, our factory has three. Square content test report, false one compensate ten.

一、DN100换热机组三元乙丙橡胶接头实物拍照:

【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”
二 、换热机组三元乙丙橡胶接头介绍:
名称:EPDM橡胶接头
型号 :KXT-EPDM
口径:DN100
压力:1.6Mpa
长度:150mm
轴向压缩:18mm
轴向拉伸:10mm
横向位移:12mm
偏向角度 :15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击 :橡胶接头法兰标准
适用介质:弱酸碱、强碱、石灰浆液、脱硫 、化工厂污水 、高温120度以下;(注明:强酸碱、稀硫酸不能用 ,要选择四氟橡胶接头才可以使用。
使用优点:减震 、降噪 、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书 :合格证、质保书 、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告 。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN100
Pressure: 1.6Mpa
Length: 150mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三 、换热机组三元乙丙橡胶接头发货现场:

【EPDM】DN100三元乙丙橡胶接头“换热机组”

四 、换热机组三元乙丙橡胶接头工厂介绍 :

【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”
【EPDM】DN100三元乙丙橡胶接头“换热机组”

相关案例 :供暖耐高温橡胶接头案例

]]>
https://www.nccdfs.com/1818.html/feed 0
【EPDM】DN125三元乙丙橡胶软连接 https://www.nccdfs.com/1817.html https://www.nccdfs.com/1817.html#respond Mon, 05 Nov 2018 01:09:07 +0000 【EPDM】DN125三元乙丙橡胶软连接
DN125 single ball three yuan ethylene propylene rubber joint

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN125三元乙丙橡胶软连接信息,尊龙凯时集团为众多化工企业提供耐酸碱型橡胶软连接减震器 ,主要用于弱酸碱管道,起到减震和降噪的作用,材料采用三井4045,含量达到50%左右 ,有三方检测报告。
The official website of Shanghai Songjiang Shock Absorber Group Co., Ltd. introduces to you: [EPDM] DN125 single ball EPDM joint information, Songjiang Group provides acid-alkali-resistant rubber joint shock absorbers for many chemical enterprises, mainly used for acid-alkali pipelines, which can reduce vibration and noise. The material used is Sanjing 4045, with a content of 50%. There are three party testing reports.

一、DN125三元乙丙橡胶软连接实物拍照 :

【EPDM】DN125三元乙丙橡胶软连接
二 、DN125三元乙丙橡胶软连接介绍:
名称:三元乙丙橡胶软连接
型号 :KXT-EPDM
口径:DN125
压力:1.6Mpa
长度:165mm
轴向压缩:18mm
轴向拉伸:10mm
横向位移:12mm
偏向角度 :15°
橡胶材质 :三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质:弱酸碱 、强碱 、石灰浆液、脱硫 、化工厂污水、海水、高温120度以下;(注明:强酸碱 、稀硫酸不能用,要选择四氟橡胶接头才可以使用。
使用优点:减震、降噪 、保护液压设备的长期使用,降低维修成本。
质保期限 :12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书 :合格证、质保书、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告  。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN125
Pressure: 1.6Mpa
Length: 165mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable media: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose tetrafluororubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Assurance Certificate, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三 、三元乙丙橡胶软连接发货现场:

【EPDM】DN125三元乙丙橡胶软连接

四、三元乙丙橡胶软连接工厂介绍:

【EPDM】DN125三元乙丙橡胶软连接
【EPDM】DN125三元乙丙橡胶软连接
【EPDM】DN125三元乙丙橡胶软连接
【EPDM】DN125三元乙丙橡胶软连接

相关案例 :化工厂橡胶接头案例

]]>
https://www.nccdfs.com/1817.html/feed 0
【EPDM】DN150三元乙丙橡胶软接头 https://www.nccdfs.com/1805.html https://www.nccdfs.com/1805.html#respond Fri, 26 Oct 2018 01:06:47 +0000 【EPDM】DN150三元乙丙橡胶软接头“含量达到50%左右”
DN150 single ball EPDM rubber joint "content is about 50%".

上海尊龙凯时减震器集团有限公司官方网站为您介绍 :【EPDM】DN150单球EPDM橡胶软接头“含量达到50%左右”信息 ,尊龙凯时集团生产的三元乙丙橡胶软接头产品有自己企业的生产标准,其中原材料为三井4045代号,含量达到50%左右,有含量检测报告 ,而且里里外外都是三元乙丙橡胶,不要拿内衬三元乙丙橡胶来比价 ,这样就是掩耳盗铃 ,尊龙凯时集团好产品不怕对比 ,更不怕检测。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces: [EPDM] DN150 single-ball EPDM rubber joints "content reaches 50%" information. The EPDM rubber joints produced by Meijiang Group have their own production standards, of which the raw material is Mitsui 4045 code name, content reaches 50%. There are content testing reports. And inside and outside are EPDM rubber, do not take the EPDM rubber lining price, so that is to hide the ears and steal bells, Songjiang Group good products are not afraid of comparison, but also not afraid of testing.

一、DN150三元乙丙橡胶软接头实物拍照 :

【EPDM】DN150三元乙丙橡胶软接头
二、DN150三元乙丙橡胶软接头介绍:
名称:EPDM橡胶接头
型号:KXT-EPDM
口径:DN150
压力:1.6Mpa
长度:180mm
轴向压缩 :18mm
轴向拉伸 :10mm
横向位移:12mm
偏向角度 :15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准 :GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击 :橡胶接头法兰标准
适用介质:弱酸碱、强碱、石灰浆液、脱硫、化工厂污水、海水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用。
使用优点:减震 、降噪 、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家:上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击 :【样册P33】KXT型可曲挠橡胶接头
资质证书:合格证、质保书、检验报告 、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告。
Name: EPDM rubber joint
Model: KXT-EPDM
Caliber: DN150
Pressure: 1.6Mpa
Length: 180mm
Axial compression: 18mm
Axial tension: 10mm
Lateral displacement: 12mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三、三元乙丙橡胶软接头发货现场:

【EPDM】DN150三元乙丙橡胶软接头

四、三元乙丙橡胶软接头工厂介绍:

【EPDM】DN150三元乙丙橡胶软接头
【EPDM】DN150三元乙丙橡胶软接头
【EPDM】DN150三元乙丙橡胶软接头
【EPDM】DN150三元乙丙橡胶软接头

相关案例:化工厂橡胶接头案例

]]>
https://www.nccdfs.com/1805.html/feed 0
【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝” https://www.nccdfs.com/1804.html https://www.nccdfs.com/1804.html#respond Fri, 26 Oct 2018 00:55:06 +0000 【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝好用”
DN200 three yuan ethylene propylene rubber joint "desulphurization and denitrification easy to use"

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝好用”信息  ,尊龙凯时集团为众多工厂环保设备脱硫脱硝系统提供减震降噪橡胶接头,采用三井4045代号三元乙丙橡胶生产,其中含量达到50%左右。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. [EPDM] DN200 Ethylene Propylene Rubber Joints "easy to use desulfurization and denitrification" information, Meijiang Group for many factories environmental protection equipment desulfurization and denitrification systems to provide damping and noise reduction rubber joints, using Sanjing 4045 code name Ethylene Propylene Rubber production, which content reached 50%. About.

一、DN200脱硫脱硝三元乙丙橡胶接头实物拍照 :

【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”
二 、脱硫脱硝三元乙丙橡胶接头介绍:
名称:三元乙丙橡胶接头
型号 :KXT-EPDM
口径:DN200
压力:1.6Mpa
长度:210mm
轴向压缩:25mm
轴向拉伸 :14mm
横向位移 :15mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质 :碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击 :橡胶接头法兰标准
适用介质 :弱酸碱、强碱 、石灰浆液、脱硫 、化工厂污水、高温120度以下 ;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用 。
使用优点:减震、降噪、保护液压设备的长期使用 ,降低维修成本 。
质保期限:12个月
生产厂家:上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书 :合格证、质保书 、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告 、含量成分检测报告。
Name: three yuan ethylene propylene rubber joint
Model: KXT-EPDM
Caliber: DN200
Pressure: 1.6Mpa
Length: 210mm
Axial compression: 25mm
Axial tension: 14mm
Lateral displacement: 15mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

四、脱硫脱硝三元乙丙橡胶接头发货现场 :

【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”

五、脱硫脱硝三元乙丙橡胶接头工厂介绍:

【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”
【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”
【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”
【EPDM】DN200三元乙丙橡胶接头“脱硫脱硝”

相关案例 :火电厂案例

]]>
https://www.nccdfs.com/1804.html/feed 0
【EPDM】DN250单球耐高温橡胶接头“直连供暖” https://www.nccdfs.com/1801.html https://www.nccdfs.com/1801.html#respond Thu, 25 Oct 2018 01:13:00 +0000 【EPDM】DN250耐高温橡胶接头“直连供暖”
DN250 single ball heat-resistant rubber joint "directly connected to heating".

上海尊龙凯时减震器集团有限公司官方网站为您介绍:【EPDM】DN250耐高温橡胶接头“直连供暖”信息 ,尊龙凯时集团为众多热力供暖工程提供耐高温橡胶接头产品,耐高温120度以下 ,采用三井4045三元乙丙橡胶接头,含量达到50%左右,具有良好的减震和降噪效果 。
The official website of Shanghai Meijiang Shock Absorber Group Co., Ltd. introduces: [EPDM] DN250 single ball high temperature resistant rubber joint "direct connection heating" information. Meijiang Group provides high temperature resistant rubber joint products for many thermal heating projects. It can withstand high temperature below 120 degrees and adopts Sanjing 4045 EPDM joint, the content of which is about 50%. It has good shock absorption and noise reduction effect.

一、DN250直连供暖耐高温橡胶接头实物拍照:

【EPDM】DN250单球耐高温橡胶接头“直连供暖”
【EPDM】DN250单球耐高温橡胶接头“直连供暖”
【EPDM】DN250单球耐高温橡胶接头“直连供暖”
二、直连供暖耐高温橡胶接头介绍:
名称:耐高温橡胶接头
型号:KXT-EPDM
口径:DN250
压力:1.6Mpa
长度:230mm
轴向压缩:25mm
轴向拉伸:14mm
横向位移:15mm
偏向角度:15°
橡胶材质:三元乙丙橡胶(三井4045)
法兰材质:碳钢 / 球墨QT450 / 不锈钢
法兰标准:GB/T 9119-2000 (除此法兰标准之外 ,我厂还可以配套更多法兰标准,如需了解其他法兰标准请点击:橡胶接头法兰标准
适用介质 :弱酸碱、强碱、石灰浆液、脱硫 、化工厂污水、高温120度以下;(注明:强酸碱、稀硫酸不能用,要选择四氟橡胶接头才可以使用。
使用优点 :减震、降噪 、保护液压设备的长期使用,降低维修成本。
质保期限:12个月
生产厂家 :上海尊龙凯时减震器集团有限公司
了解该产品更多型号参数表请点击:【样册P33】KXT型可曲挠橡胶接头
资质证书 :合格证、质保书 、检验报告、德国莱茵TUV认证、国家型式试验报告、第三方性能检测报告、含量成分检测报告 。
Name: high temperature resistant rubber joint
Model: KXT-EPDM
Caliber: DN250
Pressure: 1.6Mpa
Length: 230mm
Axial compression: 25mm
Axial tension: 14mm
Lateral displacement: 15mm
Deviation angle: 15 degrees.
Rubber material: three yuan ethylene propylene rubber (Mitsui 4045)
Flange material: carbon steel / ductile QT450 / stainless steel.
Flange standard: GB/T 9119-2000 (in addition to this flange standard, our factory can also support more flange standards, if you need to know other flange standards, please click: rubber joint flange standard)
Applicable medium: weak acid and alkali, strong alkali, lime slurry, desulfurization, chemical plant sewage, high temperature below 120 degrees; (Note: strong acid and alkali, dilute sulfuric acid can not be used, to choose Teflon rubber joint can be used.)
Advantages: shock absorption, noise reduction, protection of hydraulic equipment for long-term use, reduce maintenance costs.
Warranty period: 12 months.
Manufacturer: Shanghai Songjiang shock absorber Group Co., Ltd.
Qualification Certificate: Qualification Certificate, Quality Guarantee, Inspection Report, TS Pressure Pipeline Production License of Rubber Joint Industry, National Type Test Report, Third Party Performance Test Report, Content Component Test Report.

三 、直连供暖耐高温橡胶接头工厂介绍:

【EPDM】DN250单球耐高温橡胶接头“直连供暖”
【EPDM】DN250单球耐高温橡胶接头“直连供暖”
【EPDM】DN250单球耐高温橡胶接头“直连供暖”
【EPDM】DN250单球耐高温橡胶接头“直连供暖”

相关链接 :【天水市麦积区桥南集中供热项目】橡胶接头合同

]]>
https://www.nccdfs.com/1801.html/feed 0